SAE AMS5355 Steel, Corrosion Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization and Solution
时间:2024-05-15 02:49:49 来源: 标准资料网 作者:标准资料网 阅读:8633
Product Code:SAE AMS5355
Title:Steel, Corrosion Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion resistant steel in the form of investment castings.These castings have been used typically for parts requiring good corrosion resistance and strength up to 600 °F (316 °C), but usage is not limited to such applications (See 8.3).Certain processing procedures and service conditions may cause these castings to become subject to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions. Where stress-corrosion is considered to be a factor, precipitation heat treatment should be performed at a temperature not lower than 1000 °F (538 °C).
【英文标准名称】:TestMethodforEvaluatingChangeinColorwithaGrayScale
【原文标准名称】:用灰度标评定颜色变化的试验方法
【标准号】:ASTMD2616-1988
【标准状态】:作废
【国别】:美国
【发布日期】:1988
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:灰度;颜色变化;工艺;评定;颜色
【英文主题词】:colour;processes;grey-scales;evaluations;colourchanges
【摘要】:
【中国标准分类号】:A26
【国际标准分类号】:17_180_20
【页数】:3P;A4
【正文语种】:英语
基本信息
标准名称: | 径向弹性柱销联轴器 |
中标分类: |
机械 >>
通用零部件 >>
联轴器、制动器与变速器 |
替代情况: | 被JB/T 7849-2007替代 |
发布部门: | 西安重型机械研究所 |
发布日期: | 1995-12-01 |
实施日期: | 1996-07-01 |
首发日期: | 1900-01-01 |
作废日期: | 2007-09-01 |
归口单位: | 西安重型机械研究所 |
出版社: | 机械工业出版社 |
出版日期: | 1900-01-01 |
页数: | 17 页 |
批文号: | 机械科[1995]978号 |
适用范围
本标准规定了径向弹性柱销联轴器的型式、基本参数与主要尺寸,技术要求,检验规则和标志、包装、贮存等。 本标准所规定的联轴器适用于联接两同轴线的传动轴,具有一定的径向、轴向、角向位移补偿量和减震、缓冲性能,工作温度为-35~+80℃,传递公称转矩为1250~355000N·m。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 通用零部件 联轴器 制动器与变速器